
There they are again! Only this time it's completely different. There are no more grey markings and no guesswork about what the fence will look like at the end.

[b]Features[/b]

[list][*]Planning with preview 
[*]Snapping at tracks with distance
[*]Lots of fences, walls, hedges
[*]The fences adapt to the terrain
[*]Combination of several fence types
[/list]

[b]Use[/b]

[list=1][*]Select one of the fences from the 'Fences' category of the Assets. A fence post or hedge will now appear at the mouse cursor.
[*]After the first fence post is placed, a preview of the fence will automatically appear between the fence post and the mouse pointer.
If you click again, the two fence posts will be connected and the last fence post placed will be your starting point.
[*]You can set the fence type, orientation and collision behaviour for each segment separately. To change the fence type, simply select a different fence from the 'Fences' category.
[*]If you think your fence is finished, click on the 'Done' parameter or just press 'Escape' (my favourite).
[/list]

[b]What is this distance parameter?[/b]

All fences are now track assets. To prevent the fence from being built exactly on the track, you can adjust the distance to the track with a slider in the parameters.

[b]Dear Snowball, can you please add fence X?[/b]

If the model from [b]UG[/b], then yes. But I have relatively little time, so no stress, please.
If the model from [b]You[/b], then the same. I like to build it in.
If the model is from [b]another modder[/b], he can even build it in himself. The mod is designed in a way that this is easily possible.



Da sind sie wieder! Nur diesmal ist alles ganz anders. Es gibt keine graue Markierung mehr und kein Rätselraten, wie der Zaun am Ende aussieht.

[b]Features[/b]

[list][*]Planung mit Vorschau 
[*]Snapping an Gleise mit Abstand
[*]Jede Menge Zäune, Mauern, Hecken und Wände
[*]Die Zäune passen sich dem Gelände an
[*]Kombination mehrerer Zauntypen
[/list]

[b]Benutzung[/b]

[list=1][*]Einen der Zäune aus der Kategorie 'Zäune' bei den Assets auswählen. Es erscheint jetzt ein Zaunpfahl oder eine Hecke am Mauszeiger.
[*]Nachdem der erste Zaunpfahl platziert ist, wird automatisch eine Vorschau des Zauns zwischen dem Zaunpfahl und dem Mauszeiger angezeigt.
[*]Klickt ihr ein weiteres Mal, so werden die beiden Zaunpfähle verbunden und der zuletzt gesetzte Zaunpfahl ist nun euer Anfangspunkt.
[*]Ihr könnt für jedes Segment separat den Zauntyp, die Ausrichtung und das Kollisionsverhalten einstellen. Zum Wechseln des Zauntyps könnt ihr einfach einen anderen Zaun aus der Kategorie 'Zäune' auswählen.
[*]Wenn ihr meint, euer Zaun ist fertig, dann beendet das Bauen mit einem Klick auf den Parameter 'Fertig' oder drückt einfach 'Escape' (mein Favorit).
[/list]

[b]Was ist denn dieser Abstands-Parameter?[/b]

Alle Zäune sind jetzt Gleis-Assets. Damit der Zaun nicht genau auf dem Gleis gebaut wird, könnt ihr mit einem Schiebregler in den Parametern den Abstand zum Gleis einstellen.

[b]Lieber Snowball, kannst du bitte noch Zaun X hinzufügen?[/b]

Wenn das Modell von [b]UG [/b]ist, dann ja. Ich hab aber relativ wenig Zeit, also bitte kein Stress.
Wenn das Modell von [b]Dir [/b]ist, dito. Bau ich gerne mit ein.
Wenn das Modell von [b]einem anderen Modder[/b] ist, kann er es sogar selbst einbauen. Die Mod ist so konzipiert, dass das ganz einfach möglich ist.

Они вернулись! Но теперь всё совсем по-другому. Больше нет серых маркеров и вопросов: "как будет выглядеть забор после размещения?".
 
[b]Особенности[/b]
 
[list][*]Планирование с предварительным просмотром
[*]Привязка к дорогам на расстоянии
[*]Много заборов и живых изгородей
[*]Заборы адаптируются к местности
[*]Сочетание нескольких типов заборов
[/list]
 
[b]Использование[/b]
 
[list=1][*]Выберите в 'Ландшафт'—'Объекты' один из заборов в категории 'Fences'. Столб забора или живая изгородь появятся у курсора мыши.
[*]После того, как первый столб забора размещён, между столбом забора и указателем мыши автоматически появится предварительный вид забора.
[*]Если вы нажмете ещё раз, два столба забора будут соединены, и последний размещённый столб будет вашим отправным пунктом.
[*]Вы можете выбрать тип забора, расположение лицевой стороны в зависимости от направления строительства и поведение при столкновении для каждого сегмента отдельно. Чтобы изменить тип забора, просто выберите другой забор из категории 'Fences'.
[*]Если вы считаете, что ваш забор закончен, нажмите на 'Планировать' или просто нажмите 'Escape' (моё предпочтение).
[/list]
 
[b]Что это за параметр расстояние?[/b]
 
Все заборы теперь отслеживают объекты. Вы можете отрегулировать расстояние до ограждения с помощью ползунка в параметрах.
 
[b]Уважаемый, Snowball, не могли бы вы добавить забор X?[/b]
 
Если модель [b]UG[/b], тогда – да. Но у меня относительно мало времени, поэтому – без стресса, пожалуйста.
Если модель [b]Ваша[/b], то же самое. Мне нравится встраивать.
Если модель [b]другого мододела[/b] – он может добавить его сам. Мод разработан так, что это очень легко.